Garage Door Bounces When Closing

    Is your garage door not opening or stuck wide open? Looking for a professional repair technician?

    Get in touch with our garage door repair team and help is on it’s way! When it comes to garage door Services in Portland and its surroundings, Better leave it up to the professionals. For a FREE quote and estimate..

    CALL NOW: ☎️ (503) 850-2729

    Or, fill out this form and we will contact you shortly

    Portland Garage Door Repair

    Have you ever had to click a button to close a garage door that only goes half-way down, then reverses course and goes back up?

    Imagine you are attempting to leave the house but your garage door refuses to close.

    Having your garage door bounces when closing can be an unnerving experience for you.

    Because your garage door is likely your home’s largest outside opening, it should be secure and functional.

    Any garage door, however, might develop issues with time and frequent use.

    But, whatever the problem is, you will need professional assistance to get your garage door back in working order.

    Beaver Garage Doors Portland provides the best answer to your garage door problems.

    Our highly knowledgeable and well-trained professional garage door technicians will assist you in identifying and correcting the problem.

    To satisfy your garage door demands, we also provide a wide range of garage door services.

    For a reliable garage door repair in Portland, contact us and get your garage door back on track.

    Possible Reasons Why Your Garage Door Bounces When Closing

    There is no single reason why your garage door closes and then opens, as there is with the many other home concerns.

    If you are having trouble with your garage door, take a look at the possible causes and some garage door repair advice below.

    1. Check for any obstructions

    The simplest thing you can do if your garage door bounces when closing or reverses shortly after closing is to inspect the threshold for anything that is blocking it.

    Even the tiniest obstruction will prompt your garage door to go back up in order to maintain safety and prevent harm.

    If, on the other hand, the threshold is clear, it could be a whole different issue.

    With this, it is best to consult a professional to correctly diagnose the issue.

    1. Replace logic board

    The logic board in your garage door opener is the brain of the system.

    Because this brain can wear out over time, you may require a replacement.

    Once your logic board wears out, it can cause your garage door to close, then open without apparent reason.

    1. Modify travel down setting

    Before closing, your garage door is set to go a specific distance.

    If it closes before that distance has been traveled, it assumes something is wrong and reopens to help prevent any potential damage or danger.

    However, variations in weather might cause the components of your garage door to shift or contract.

    The distance your garage door must travel may change as a result. In situations like this, simply modify your “travel down” setting to the new distance.

    1. Adjust the limit switch

    Check your garage door limit setting if you have not been able to find any problems so far.

    The garage door will not close level with the ground if the travel limit is set too high.

    Your garage door, on the other hand, may hit the ground and “believe” there is an object in its way, prompting it to reopen.

    How to Adjust Garage Door Limits?

    Depending on the garage door brand and model, the technique for modifying limit settings differs.

    The simplest solution is to consult the owner’s manual. If you don’t have a hard copy, look up the brand and model number online.

    The only item you will need to make the adjustment is a screwdriver. Follow these steps with this tool in hand:

    • Examine the engine housing attached to the garage ceiling. Two plastic screw heads or knobs should be found on the back, side, or bottom of the housing.
    • Begin by turning the down limit screw or knob in the “minus” direction one full turn.
    • Check to see if the garage door stays shut.
    • Continue adjusting the limit screw until you achieve the desired result.

    Schedule Garage Door Repair in Portland

    It’s inconvenient to have a garage door that refuses to close.

    If nothing else is wrong with your garage door, try these troubleshooting tips.

    However, if the door continues to bounce open after rotating the screw four or five times, the limit switch component may be broken.

    The garage door sensors may also be out of position, or the rollers may not be moving smoothly down the track.

    Whatever the issue is, you’ll need the assistance of a professional to get your garage door back up and running.

    Regarding this matter, you can count on Beaver Garage Doors Portland.

    We have years of experience providing garage door installation, repair, and maintenance to solve a wide range of issues.

    To schedule an appointment, get in touch with us today!

    Rate this post
    COVID-19 NOTICE:
    Our technicians are equipped with masks and gloves complying with health and safety regulations.
    This is default text for notification bar